Yes it can be done single handed - sky hooks Mk 2. Partial pre-drilling the end holes using a 1.5mm drill improves the chances of getting the end pins in first time ( 1mm is fine but break too many). Only the last board needed two sets of hands.
One hook at each end - screw close up to the roof as the anchor. Remove once ends are pinned but before the rest go in!
Nearly there only last board to fit after priming the underside of the roof.
and all this time the guys have been doing the cladding between two of them!!!!!! I shall be having words :) haha
ReplyDeletelooks like its coming on well, cannot wait to see the next instalment - George
You really have to add bailer twine to any list of "required tools" for ANY job. I could supply it for a small consideration!
ReplyDelete